Ergonomic 2.4G wireless remote control make it easier to control the skateboard, switch when you want. There are 3 modes of speed for your choice and once pair, the skateboard will connect with the remote automatically next time. Smart Power-on and Power-off Design. Slide forward 30cm, then the skateboard will automatically turn on, and automatically power-off after 30 second of stopping. Also, it can use as a normal skateboard if the power off.
Its shell adopts one-piece material, the built-in battery will not be exposed, the board is tightly and light, comply with IP54 waterproof. The thickness is less than 3 cm, which is very light and portable.
At the first step, the board and remote must be paired. Before starting, ensure the board and remote turn off, then turn on the board, press the power button for 5 seconds, the power button light will flash. Next turn on the remote, then press the pair button. After tested all functions and worked normal, you can start your riding. Please press and hold the brake button of the remote control while stepping on the skateboard, so that the skateboard will not slide forward when stepping on the skateboard, making it easier to stand and keep balance.
The electric skateboard is designed to drive on flat and paved surfaces. Avoid driving on sand, gravel, mud, rugged or open ground.
Do not drive on slippery ground, such as snow, ice or wet ground. Do note that an electric skateboard is not a toy. Please take some times to learn it and read the manual carefully before using your new electric skateboard.Particularly the safety instruction pages. We hope you will enjoy this product and have lots of fun with it in the future.
30KM/H [Speed may reduce as the load increases]. This item is in the category "Sporting Goods\Skateboarding\Complete Skateboards".The seller is "brandon2698" and is located in this country: GB. This item can be shipped to United Kingdom.