1/10th Tacon Pursuer On Road BRUSHLESS Motor RC Car RTR Remote Control Race Car with lipo battery. Video will open in a new window.
The Tacon is a 1/10 scale on road car. It was designed from the ground up with pure performance in mind. Performance features derived from 1/8 scale vehicles have been shrunken down in size and engineered to deliver the utmost performance in a small on road car package. A 2mm thick aluminum chassis serves as the base of this on road car. Mounted on the front and rear is 2.5mm thick 6061-T6 anodized aluminum shock towers towering over the metal geared fluid filled differentials.
Attached to the robust towers are aluminum threaded oil filled shocks providing plush and ground hugging dampening. This car has awesome power to weight ratio. Weighing in at slightly over 2 lbs, the vehicle is easily propelled by the 380 sized 4500KV brushless motor. A 80 amp programmable brushless electronic speed controller delivers the current efficiently through an included 7.4v 3800mah LIPO battery.
All of this power transfers through a shaft driven four wheel drive system providing ground clawing action through the performance wheels and rally spec tires. The Tacon ready to run package also includes a 2.4ghz radio system. With frequency hopping technology, interference is a thing of the past. No longer do you have to worry about your specific channel.With a body designed with on road car looks and aerodynamic performance, combined with a roof spoiler on the rear hatch. This scale on road machine will put a huge smile on your face when you see it four wheel power sliding through a corner spitting dirt and debris out the rear end.
Tacon design 1/10 race tires 2. Tacon design slipper pad with adjustable gear cover 3. Aluminum-threaded, oil-filled, coil-over, 6061-T6 ajustable shocks. 2.5mm 6061-T6 aluminum shock towers. Front and rear metal gear differentials.80A programmable ESC, Lipo 2S/3S compatible. 4 pole 6.5T 2850 4500KV brushless motor. Adjustable mini servo with saver. Steel hinge-pins with rounded front bumper 11. Tacon receiver with 2.4GHz technology. 7.4V LIPO 3800mAh battery with 3.5mm gilded round connectors. 2.5mm anodized aluminum rear and front kick-up chassis with dirt guards 14. Specifications: Scale: 1/10 Length: 430mm (17in) Width: 190mm (7.5in) Height: 120mm (4.7in) Wheelbase: 250mm (9.85in) Weight: 1.3kg (2.8lbs with battery) Tire Type: Tacon Rally Tread Chassis: 2.0mm anodized aluminum Motor or Engine: 4500Kv 2850 brushless motor Gear ratio:8.23 Speed Control: 80A Brushless Radio: 2.4GHz Technology Batteries: 7.4V LIPO with 3.5mm gilded round connector, Charger not included Shock Type: Aluminum-threaded, oil-filled, coil-over, 6061-T6 ajustable Ball Bearings: Complete. Package Contents: 100% Assembled 1x 1/10 Tacon Pursuer 2CH 2.4Hz Transmitter and receiver. 1x 7.4v 3800mAh LIPO battery 1x Instruction Manual.
Required to Run: AA Batteries for Transmitter LIPO Charger. Sign up to our newsletter for special deals. The item "Tacon 1/10 Pursuer On Road BRUSHLESS RC Car RTR Remote Control Race Car Lipo Bat" is in sale since Thursday, February 21, 2019. This item is in the category "Toys & Hobbies\Radio Control & Control Line\RC Model Vehicles & Kits\Cars, Trucks & Motorcycles". The seller is "ibuyrc" and is located in La Puente, California.This item can be shipped to United States, Canada, United Kingdom, Denmark, Finland, Portugal, Sweden, Belgium, France, Ireland, Netherlands, Spain, Italy, Germany, Mexico, Switzerland, Norway, Brazil, Iceland.